Product Overview
Signal Repeater Kit for Voice/SMS, 4G LTE & 3G – SD-BIG-GDW (900MHz / 1800MHz / 2100Mhz) SD-BIG-GDW
Using this device, you can boost your mobile signal in wide open areas like; Villages in valleys with weak or no signal, Quarry or Open Pit Mines. Not only that, you can also use it in a tunnel or large-spaced underground. It can be used by unlimited people in the area, and can work on all mobile network operators in Ireland, Europe, Asia, America and the rest of the world.
This remarkable signal enhancing device should be used with a StellaDoradus Tri-band repeater, like the SD-RP-1002-GDW
Once installed, you can say Sayonara, Au revoir, Adiós, or Mar sin leat to dropped calls, sluggish internet and dead zones!
If you're a technical person, you can read the Technical Specifications below.
Reference Image: SD-BIG-GDW Mobile Signal Repeater Installation Overview. This system is ideal for boosting mobile signals in outdoor areas.
Technical Specification
| Repeater Specification | |
|---|---|
| Frequency Bands (Mhz) | 900MHz + 1800MHz + 2100MHz |
| Range (depends on received signal) | ~3Km |
| Number of People | Unlimited |
| Gain | Uplink Gp > 20dB Downlink Gp > 20dB |
| Pass Band Riple | < 4dB |
| I/O Impedance | 50 ohm/N Connector |
| Max uplink/downlink signal strength | 0dBm / 18dBm |
| Ambient Temperature | -30°C to +70°C |
| Power Supply Input | 110-240V AC |
| Power Supply Output | 12V DC |
| Oscillation Control | Automatic |
| Level Control | Automatic* |
| Uplink Switch Off | Yes** |
| AGC Range | 30db |
| Surge Protection | SMA Connectors DC grounded, 12V DC port MOV protected |
| Antenna Specification: Indoor / Outdoor Antenna | |
| Nominal Gain | 6.4dBi / 9.4dBi |
| 3dB Beam Pattern | 60° x 60° |
| Bandwidth | 790-960MHz + 1710-2700MHz |
| VSWR | <1.4 |
| Front to Back Ratio | >20dB |
| Polarization | Vertical |
| Power Rating | 50W |
| Impedance | 50-OHM |
| Termination | SMA Male |
| Cross Pol. Discrimination | -20dB |
| Dimensions | 210x180x43mm |
| Weight | 0.68Kg |
| Wind Velocity | 126Km/Hr |
| Working Temperature | ~40°C to +65°C |
| Power Supply Specification | |
| AC | 100-240V, 50-60Hz |
| DC | 12V, 1.6A |
| Typical Power Usage | 20W |
| Mechanical Specification | |
| Length | 40cm |
| Width | 19cm |
| Depth | 3.5cm |
| Weight | 1.2Kg |
| Mounting | 4 x 5mm holes for mounting |
